User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Initial IP Address Configuration
- 4. Web Console Configuration
- 5. System Management Settings
- 6. Introduction and Configuring VPN
- 7. Configuring OnCell Central Management Software
- 8. OnCell Search Utility
- A. Default Settings
- B. Dynamic Domain Name Server
- C. Auto IP Report Protocol
OnCell 5000 Series Initial IP Address Configuration
3-3
1. From the Windows desktop, select Start Æ Run, and then type the following content in the Run window:
telnet 192.168.127.254. If your IP address is different from the default setting, use your IP address
instead. Click OK.
2. The console terminal type selection is displayed, as shown below. Enter 1 for ansi/vt100, and then press
ENTER to continue.
3. The following window will only appear if the OnCell 5000 is password protected. Enter the console password
if you are prompted to do so, and then press ENTER.