User Manual

- 9 -
FCC Part 15 Subpart B, Class A
Safety
UL: UL 60950-1
LVD: EN 60950-1
DSPR: ARIB-STD 33, ARIB-STD 66
Fault Relay Circuit
3-pin circuit with current-carrying capacity of
2 A @ 30 VDC
ATTENTION
This product is intended to be supplied by an UL
listed DC
source
suitable for use at T
MA of 60 degree C, which
output meets SELV
circuit and LPS
, which is separated from the primary circuit by
double insulation or reinforced insulation, and is rated 12
-
48Vdc,
0.38-0.1A or min. 0.38A; or 24Vdc, min. 0.17A.
ATTENTION
The risk of an
explosion is very high if the
battery is replaced by
an incorrect type. Dispose of used batteries according to the
instructions.
ATTENTION
This equipment is intended to be used in Restricted Access
Location.
WARNING:
HOT SURFACE. DO NOT TOUCH! Before touching the surface, pay
special attention and take the necessary protection measures.