Datasheet

www.moxa.com

Specifications

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector) 1

Magnetic Isolation Protection 1.5 kV (built-in)

Ethernet Software Features

Configuration Options Telnet Console, Windows Utility, Web Console (HTTP/HTTPS)

Management ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, Rtelnet, SMTP,

SNMPv1/v2c, TCP/IP, Telnet, UDP

Filter IGMP v1/v2

Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64),

Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP

Embedded

Linux Real TTY Drivers Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x

Fixed TTY Drivers SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.

x, HP-UX 11i, Mac OS X

Android API Android 3.1.x and later

Time Management SNTP

Serial Interface

Connector NPort 5410/5450/5450-T/5450I/5450I-T: DB9 male

NPort 5430/5430I: Terminal block

No. of Ports 4

Serial Standards NPort 5410: RS-232

NPort 5430 Series: RS-422, RS-485

NPort 5450 Series: RS-232, RS-422, RS-485

Operation Modes Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, TCP Client,

TCP Server, UDP

Baudrate Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800,

2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k

Data Bits 5, 6, 7, 8

Stop Bits 1, 1.5, 2

Parity None, Even, Odd, Space, Mark

Flow Control RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF

Isolation 2 kV isolation for NPort 5430I/5450I/5450I-T

Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms

RS-485 Data Direction Control ADDC® (automatic data direction control)

Terminator for RS-485 120 ohms

Serial Signals

RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422 Tx+, Tx-, Rx+, Rx-, GND