User Manual

ManualsBrandsMoxa Manualscomputer componentsNPORT 5210-T

P/N: 1802052000313

*1802052000313*

NPort 5200 Series

Quick Installation Guide

Edition 8.0, February 2017

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



Summary of content (7 pages)

PAGE 1
NPort 5200 Series Quick Installation Guide Edition 8.0, February 2017 Technical Support Contact Information www.moxa.
PAGE 2
Overview The NPort 5200 compact palm-sized device servers are used to control RS-232 (NPort 5210/5230/5210-T/5230-T) or RS-422/485 (NPort 5230/5232/5232I/5230-T/5232-T/5232I-T) serial devices over a TCP/IP-based Ethernet. NOTE “-T” indicates an extended operating temperature model.
PAGE 3
Reset Button—Press the Reset button continuously for 5 sec to load factory defaults: Use a pointed object, such as a straightened paper clip or toothpick, to press the reset button. This will cause the Ready LED to blink on and off. The factory defaults will be loaded once the Ready LED stops blinking (after about 5 seconds). At this point, you should release the reset button. NPort 5200 LED Indicators (top panel) LED Name LED Color LED Function Steady on: Power is on and the NPort 5200 is booting up.
PAGE 4
Hardware Installation Procedure STEP 1: After removing the NPort 5200 from the box, the first thing you should do is connect the power adapter. Connect the 12-30 VDC power line with the NPort 5200’s terminal block, or connect the DIN-rail power supply with the NPort 5200’s terminal block. STEP 2: Connect the NPort 5200 to a network. Use a standard straight-through Ethernet cable to connect to a hub or switch.
PAGE 5
NOTE The NPort 5232/5232I/5232-T/5232I-T have 2 RS-422/485 ports. The pin assignments are the same as the NPort 5230/5230-T’s port 2. Refer to the “NPort 5200 Series User’s Manual” for more details. Pin Assignments and Cable Wiring— NPort 5210/5210-T RJ45 (8-pin) Connector Pinouts 8-Pin 1 2 3 4 5 6 7 8 Signal DSR RTS GND TxD RxD DCD CTS DTR Cable Wiring (RS-232) Four cables are available as optional accessories to connect the NPort 5210/5210-T to RS-232 serial devices.
PAGE 6
RJ45 (8-pin) to DB9 Female (Cable Name: CBL-RJ45F9-150) RJ45 (8-pin) to DB9 Male (Cable Name: CBL-RJ45M9-150) Specifications Power Requirements NPort 5210/5210-T: 12 to 48 VDC, 325 mA at 12V (max.) NPort 5230/5230-T: 12 to 48 VDC, 325 mA at 12V (max.) NPort 5232/5232-T: 12 to 48 VDC, 280 mA at 12V (max.) NPort 5232I/5232I-T: 12 to 48 VDC, 365 mA at 12V (max.) Operating Temp.
PAGE 7
Regulatory Approvals Safety UL 60950-1 EMC EN 55032/24 EMI CISPR 32, FCC Part 15B Class A EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.