User Manual

- 4 -
STEP 5:
Use the serial data cable to connect the evaluation board to a
serial device.
Software Utility Installation Procedure
Use the following installation procedure for each MiiNePort E model:
Software Installation
For software installation, download the relevant utilities from Moxa's
website: https://www.moxa.com/en/support
1. Start the Device Search Utility (DSU) setup program to begin
the installation. When the Welcome window opens, click Next.
2. Click Install to install program files in the default directory.
3. The Installing window reports the progress of the installation.
4. Click Finish to complete the installation.
Module Configuration
1. Start the DSU program.
2. Select the Search function from the function icons.
3. After the search is finished, all MiiNePort E modules that were found
will be shown in the search window. If you locate more than one
module connected to this network, refer to the MAC address on the
module(s) to determine the modules you wish to configure.
4. Double-click on the MiiNePort E module you wish to configure; your
web browser will be activated with the MiiNePort E’s web console.
5. The default IP address of the MiiNePort E is 192.168.127.254, and
the default login credentials:
username: admin
password: moxa
6. Refer to Chapter 7 of the MiiNePort E Series User’s Manual for
additional configuration instructions.
Evaluation Board Layout
E1 Series