User Manual

- 3 -
Available Starter Kits
• MiiNePort E1-ST: Starter kit for the MiiNePort E1 Series, module
included
• MiiNePort E1-H-ST: Starter kit for the MiiNePort E1-H Series,
module included
• MiiNePort E2-ST: Starter kit for the MiiNePort E2 Series, module
included
• MiiNePort E2-H-ST: Starter kit for the MiiNePort E2-H Series,
module included
• MiiNePort E3-ST: Starter kit for the MiiNePort E3 Series, module
included
• MiiNePort E3-H-ST: Starter kit for the MiiNePort E3-H Series,
module included
Package Checklist
Each MiiNePort E Series starter kit package contains the following
items:
• 1 MiiNePort E Series module
• 1 MiiNePort E Series evaluation board
• 1 universal power adapter
• 2 power cords
• 1 null modem serial cable
• 1 cross-over Ethernet cable
• 1 product warranty booklet
• 2 flat cables (MiiNePort E3 Series only)
• 1 pack of screw and spacer (MiiNePort E3 Series only)
• Quick installation guide (print)
• Warranty card
NOTE
Please notify your sales representative if any of the above
items are missing or damaged.
Hardware Installation Procedure
Follow these steps to prepare the module and evaluation board for
testing and application development.
STEP 1:
Plug the MiiNePort E module into the sockets on the top of
the evaluation board.
ATTENTION
For detailed information about the pin assignments, wiring, LED
indicators, and board layouts, refer to Chapter 1 and 2 of the
MiiNePort E Series User’s Manual.
STEP 2:
Connect the 12 to 48 VDC power line with the evaluation
board’s power jack.
STEP 3:
Switch on the power switch
STEP 4:
Use an RJ45 Ethernet cable to connect the MiiNePort E
module to an Ethernet network.