Datasheet

www.moxa.com
1
MGate 5102-PBM-PN Series
1-port PROFIBUS-to-PROFINET gateways
Features and Benefits
• Protocol conversion between PROFIBUS and PROFINET
• Supports PROFINET IO device
• Supports PROFIBUS DP V1 master
• Automatic scan of PROFIBUS devices and easy configuration
• Web-based GUI for I/O data visualization
• Built-in Ethernet cascading for easy wiring
• microSD card for configuration backup/duplication and event logs
• Embedded I/O monitoring and diagnostic information for easy
troubleshooting
• Status monitoring and fault protection for easy maintenance
• Supports redundant dual DC power inputs and 1 relay output
• -40 to 75°C wide operating temperature models available
• Serial port with 2 kV isolation protection
• Security features based on IEC 62443
Certifications
Introduction
The MGate 5102-PBM-PN gateway provides a communication portal between PROFIBUS devices (e.g., PROFIBUS PLC or drive) and the
PROFINET host. All models are protected with a rugged metallic casing, DIN-rail mountable, and offer optional built-in optical isolation. The
PROFIBUS and Ethernet status LED indicators are provided for easy maintenance. The rugged design is suitable for industrial applications such as
oil and gas, power, process automation, and factory automation.
Easy Setup Tools
Both the Windows MGate Manager utility and web console support
the AutoScan function, which makes configuration and operation
easy. AutoScan automatically detects all connected PROFIBUS slave
devices and their available I/O modules, allowing you to configure
your gateways very quickly, and a data mapping table is provided.
Furthermore, one click is all that’s needed to export all PROFIBUS I/O
modules to a GSDML file to assist in the configuration of the
PROFINET controller (e.g., a Siemens PLC).
A Variety of Maintenance Functions
The MGate 5102-PBM-PN provides a web console and Telnet console for remote maintenance, with both consoles supporting encryption
commutation functions such as HTTPS and SSH to prevent unauthorized access. The status and changes in I/O data of all PROFIBUS slaves can
be monitored remotely via the web console, and users can also review the log from the web console to see which system events have occurred. A
relay output alarm is provided for the power input and Ethernet cable status. These functions make it easy for maintenance engineers to
troubleshoot and maintain devices.
Redundant Power Inputs
The MGate 5102-PBM-PN has dual power inputs for greater reliability. The power inputs allow simultaneous connection to 2 live DC power sources
to provide uninterrupted operation even if one power source fails. The higher level of reliability makes these advanced PROFIBUS-master-to-
PROFINET gateways ideal for demanding industrial applications.