Installation Guide
Table Of Contents
- MDS-G4000/MDS-G4000-L3 Series Quick Installation Guide
- Package Checklist
- Default Settings
- Panel Layouts
- Dimensions
- Ethernet Modules (Hardware Rev.2.0.0 and above)
- Power Modules (Hardware Rev.2.1.0 and above)
- DIN-rail Dimensions and Instructions
- Wall-mounting Dimensions and Instructions (Optional: WK-112-01)
- Rack-mounting Dimensions and Instructions (Optional: RK-3U-02)
- Matters That Require Attention
- Connecting the Power Inputs
- Power Terminal Blocks
- PoE Power Terminal Blocks
- Wiring the Relay Contact
- Digital Input/Output
- Installing and Removing the Ethernet Modules
- Installing and Removing the Power Modules
- Grounding the Moxa Industrial DIN-rail Switch
- RS-232 with RJ45 Interface Console Connection
- USB Connection
- Reset to Factory Default Settings
- LED Indicators
- Specifications
- Supported SFP Modules
- Restricted Access Locations
- Special Conditions of Use
- Hazardous Location Usage Terms
- 16 -
LM-7000H-4GPoE/LM-7000H-4PoE
LED
Color
State
Description
MS
(Module State)
Green
On
Normal operation.
Blinking
The module is booting up.
Off
This module is out of service.
Red On
1. The module failed to initialize.
2. A user inserted a module designed
for a different model.
3. When performing a cold start, the
module was removed and inserted
before initialization was complete.
EPS
(External Power
Supply for PoE
module)
Amber
On
Normal operation.
Off No external power supply for PoE.
Copper
(10/100
Mbps)
Green
On
When the port is active and links on
100 Mbps.
Blinking
When the port’s data is being
transmitted at 100 Mbps.
Off
When the port is inactive or link
down.
Amber
On
When the port is active and links on
10 Mbps.
Blinking
When the port’s data is being
transmitted at 10 Mbps.
Off
When the port is inactive or link
down.
Copper
(10/100/
1000Mbps)
Green
On
When the port is active and links on
1,000 Mbps.
Blinking
When the port’s data is being
transmitted at 1,000 Mbps.
Off
When the port is inactive or link
down.
Amber
On
When the port is active and links on
10/100Mbps.
Blinking
When the port’s data is being
transmitted at 10/100 Mbps.
Off
When the port is inactive or link
down.
PoE/PoE+
Green
On
When the port is connected to IEEE
802.3at powered device (PD).
Off
1. When the power is not being
supplied to a powered device (PD), or
2. The port is not connected to an
IEEE 802.3at standard PD.
Amber
On
When the port is connected to IEEE
802.3af powered device (PD).
Blinking
The PoE power has been shut off
because of low power budget.
Red
On
Powered device (PD) detection
failure.
Blinking
When detecting over current or short
circuit on the powered Device (PD).