User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
9
2. Getting Started
In this chapter, we explain how to log in a Moxa’s switch for the first time. There are three ways to access
the Moxa switch’s configuration settings: RS-232 console, telnet (disabled by default) or web-based
interface.
Log in by Web Interface
You can directly connect Moxa’s switch to your computer with a standard network cable or install your
computer at the same intranet as your switch. Then you need to configure your computer’s network setting.
The default IP address for the Moxa’s switch is:
192.168.127.253
For example, you can configure the computer’s IP setting as 192.168.127.99, and the subnet mask as
255.255.255.0.
Click OK when finished.