User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
41
DNS Server 2
Setting
Description
Factory Default
Input the IP address of
the 2nd DNS server
Specify the IP address of the 2nd DNS server used by your
network. The switch will use the secondary DNS server if the
first DNS server fails to connect.
None
IPv6 Global Unicast Address Prefix (Prefix Length: 64 bits) Default Gateway
Setting
Description
Factory Default
Global Unicast Address
Prefix
The prefix value must be formatted according to the RFC 2373
IPv6 Addressing Architecture, using 8 colon-separated 16-bit
hexadecimal values. One double colon can be used in the
address to indicate the appropriate number of zeros required
to fill the undefined fields.
Note: This feature is only available in Advanced Mode.
None
IPv6 DNS Server 1
Setting
Description
Factory Default
Input the IPv6 IP
address of the 1st DNS
server
Specify the IPv6 address of the 1st DNS server used by your
network. After specifying the DNS server’s IP address, you can
use the switch’s URL (e.g., www.mymoxaswitch.com) to open
the web console instead of entering the IP address.
Note: This feature is only available in Advanced Mode.
None
IPv6 DNS Server 2
Setting
Description
Factory Default
Input the IPv6 address
of the 2nd DNS server
Specify the IPv6 address of the 2nd DNS server used by your
network. The Moxa switch will use the secondary DNS server if
the first DNS server fails to connect.
Note: This feature is only available in Advanced Mode.
None
IPv6 Global Unicast Address
Setting
Description
Factory Default
None
Displays the IPv6 Global Unicast address. The network portion
of the Global Unicast address can be configured by specifying
the Global Unicast Prefix and using an EUI-64 interface ID in
the low order 64 bits of the address. The host portion of the
Global Unicast address is automatically generated using the
modified EUI-64 form of the interface identifier (the switch’s
MAC address).
Note: This feature is only available in Advanced Mode.
None
IPv6 Link-Local Address
Setting
Description
Factory Default
None
The network portion of the Link-Local address is FE80 and the
host portion of the Link-Local address is automatically
generated using the modified EUI-64 form of the interface
identifier (the switch’s MAC address).
Note: This feature is only available in Advanced Mode.
None
When finished, click APPLY to save your changes.