User Manual

ioMirror E3210 LCD Display Kit

A-2

Display Explanation / Actions

mirror

Enter this submenu to view and set the IP address of the remote output module.

This is only for ioMirrors that are operating in Module-to-Module mode:

• M_M IP

i/o setting

Enter this submenu to view I/O channel status. Here are examples of settings that

you might see:

• di-00 = on

• di-07 = 0

Press up or down to navigate through the different I/O channels without having to

go back to the previous menu.

ping

Select this option to enter an IP address to ping. If you get a “timeout” error, it

indicates that the unit cannot reach that IP address. Otherwise, the display will

show the response time.

• ip address

• ping ip

save/restart

Enter this submenu to display the restart now submenu. Enter the restart now

submenu to display the restart option. Press the center button to modify this

option, then select enable to save changes and reboot the ioMirror server. The

disable option has no effect.

ATTENTION

Configuration changes that are made through the LCD display kit will not take effect until the unit has been

restarted.