Manualshelf

User Manual

ManualsBrandsMoxa ManualsComputing & Network ProductsEthernet Peer-to-Peer I/O Unit
21222324252627282930
ioMirror E3210 Using the Web Console
3-7
System Management
Accessible IP Settings
On the Accessible IP Settings page, you may control who has configuration access to the ioMirror by entering
the permitted IP Address and Netmask. When the accessible IP list is enabled, only network hosts on the list
may configure the ioMirror. Use the accessible IP list as follows:
• To grant access to a specific IP address, use Netmask = 255.255.255.255.
• To grant access to hosts on a specific subnet, use a non-trivial Netmask, such as 255.255.255.0.
• To grant access to any network host, disable the accessible IP list. You may use the following sample
entries for reference:
Desired Hosts
IP Address
Netmask
192.168.1.120
192.168.1.120
255.255.255.255
192.168.1.1 to 192.168.1.254
192.168.1.0
255.255.255.0
192.168.0.1 to 192.168.255.254
192.168.0.0
255.255.0.0
192.168.1.1 to 192.168.1.126
192.168.1.0
255.255.255.128
192.168.1.129 to 192.168.1.254 192.168.1.1 255.255.255.128