User Manual

ioMirror E3210 Using the Web Console
3-2
Overview
Opening the Web Console
Use a standard web browser, such as Microsoft Internet Explorer, to open the web console. Simply point the
browser to your ioMirror’s IP address. For initial configuration, use the ioMirror default IP address of
192.168.127.254.
The web console should appear as below:
The main page of the web console displays detailed information about your ioMirror unit, including module
name, serial number, firmware version, IP address, and MAC address.
Navigation
In the web console, the left panel is the navigation panel and contains an expandable menu tree for navigating
among the various settings and categories. Click on an item in the navigation panel to jump to that page. For
example, if you click on Basic Settings in the navigation panel, the main window will show a page of basic
settings that you can configure.
You can enter configuration changes directly on the page. Click on the Submit button at the bottom of the page
after making configuration changes. The Submit button will be located at the bottom of every page that has
configurable settings. If you navigate to another page without clicking the Submit button, your changes will
not be retained.
Submitted changes will not take effect until they are saved and the unit is restarted! You may save
and restart the server in one step by clicking on the Save/Restart button after you submit a change. If you
need to make several changes before restarting, you may save your changes without restarting by selecting
Save/Restart in the navigation panel. If you restart the unit without saving your configuration, you will lose all
configuration changes that have been submitted.