User Manual

ioMirror E3210 Hardware Installation
2-3
DO
Alarm Output
Setting the IP Address
Static or Dynamic IP
The ioMirror E3210 supports both static and dynamic IP addresses. You may need to consult with your network
administrator to determine how IP addresses are assigned in your network environment:
• For a static IP environment, you can enter a specific IP address using ioMirrorAdmin or the web console.
• In a dynamic IP environment (BOOTP or DHCP), you can use ioMirrorAdmin or the web console to
specify the DHCP, DHCP/BOOTP, or BOOTP server that will assign the ioMirror’s IP address.
Factory Default Settings
The factory default network settings are as follows:
• IP address: 192.168.127.254
• Netmask: 255.255.255.0
• Gateway: None