User`s manual

F
F
Appendix F. Factory Default Settings
The ioLogik E2260 is configured with the following factory defaults:
Default IP Address: 192.168.127.254
Default Netmask: 255.255.255.0
Default Gateway: 0.0.0.0
Communication Watchdog: Disable
RTD Mode: PT 100
Unit: Degree C
DO Mode: DO
DO Safe Status: Off
Power On Status: Off
Low Width for Pulse: 1 × 5 ms
Hi Width for Pulse: 1 × 5 ms
Output Pulses: 0 (continuous)
Password: NONE
Module Name: NONE
Module Location: NONE
SNMP: Enable
Community: Public
Contact: NONE
Location: NONE
Click&Go NONE