User`s manual
E
E
Appendix E. CGI Commands
Using a web browser or standard HTTP protocol will make it easier for a Security SCADA system
to monitor and control an ioLogik via CGI commands.
Syntax to get the settings is as follows. Starting with the ioLogik’s IP or URL, specify
getParam.cgi with a question mark. Then specify the command with another question mark as the
ending. The commands are case sensitive and the & sign is used to combine multiple commands.
Commands to get system information Commands to get system information
DATE FWR_V
TIME MOD_NAME
IP SN_NUM
LOC MAC_ADDR
DESC
Commands to get RTD information Commands to get RTD information
RtdEnable_00
(0:Disable, 1:Enable)
RtdEnable_01
(0:Disable, 1:Enable)
RtdStype_00
(0:PT50, 1:Pt100, 2:Pt200, 3:Pt500, 4:Pt1000, 5:JPt100,
6:JPt200, 7:JPt500, 8:JPt1000, 9 :Ni 100, 10 :Ni 200, 11 :Ni
500, 12 :Ni 1000, 13 :Ni 120, 14 :Resistance (1-310 m),
15:Resistance (1-620 m), 16 :Resistance (1-1250 m),
17:Resistance (1-2200 m))
RtdStype_01
(0:PT50, 1:Pt100, 2:Pt200, 3:Pt500, 4:Pt1000, 5:JPt100,
6:JPt200, 7:JPt500, 8:JPt1000, 9 :Ni 100, 10 :Ni 200, 11 :Ni
500, 12 :Ni 1000, 13 :Ni 120, 14 :Resistance (1-310 m),
15:Resistance (1-620 m), 16 :Resistance (1-1250 m),
17:Resistance (1-2200 m))
RtdUtype_00
(Unit Types. 0:°C, 1:°F, 2:)
RtdUtype_01
(Unit Types. 0:°C, 1:°F, 2:)
RtdStatus_00 RtdStatus_01
RtdEnable_02
(0:Disable, 1:Enable)
RtdEnable_03
(0:Disable, 1:Enable)
RtdStype_02
(0:PT50, 1:Pt100, 2:Pt200, 3:Pt500, 4:Pt1000, 5:JPt100,
6:JPt200, 7:JPt500, 8:JPt1000, 9 :Ni 100, 10 :Ni 200, 11 :Ni
500, 12 :Ni 1000, 13 :Ni 120, 14 :Resistance (1-310 m),
15:Resistance (1-620 m), 16 :Resistance (1-1250 m),
17:Resistance (1-2200 m))
RtdStype_03
(0:PT50, 1:Pt100, 2:Pt200, 3:Pt500, 4:Pt1000, 5:JPt100,
6:JPt200, 7:JPt500, 8:JPt1000, 9 :Ni 100, 10 :Ni 200, 11 :Ni
500, 12 :Ni 1000, 13 :Ni 120, 14 :Resistance (1-310 m),
15:Resistance (1-620 m), 16 :Resistance (1-1250 m),
17:Resistance (1-2200 m))
RtdUtype_02
(Unit Types. 0:°C, 1:°F, 2:)
RtdUtype_03
(Unit Types. 0:°C, 1:°F, 2:)
RtdStatus_02 RtdStatus_03
RtdEnable_04
(0:Disable, 1:Enable)
RtdEnable_05
(0:Disable, 1:Enable)
RtdStype_04
(0:PT50, 1:Pt100, 2:Pt200, 3:Pt500, 4:Pt1000, 5:JPt100,
RtdStype_05
(0:PT50, 1:Pt100, 2:Pt200, 3:Pt500, 4:Pt1000, 5:JPt100,