User`s manual

ioLogik E2260 User’s Manual Using the Web Console
4-9
LCM
If you have installed the optional LCM, you may view the LCM’s status and firmware details on
the LCM page.
Change Password
When changing the ioLogik E2260’s password settings, you will first need to enter the old
password. Leave this blank if you are setting up password protection for the first time. To set up a
new password or change the existing password, enter your desired password under both New
password and Confirm password. To remove password protection, leave the New password and
Confirm password fields blank.
ATTENTION
If you forget the password, the ONLY way to configure the ioLogik E2260 is by using the reset
button to load the factory defaults.
Before you set a password for the first time, it is a good idea to complete the ioLogik’s
configuration and export the configuration to a file. The configuration can then be easily loaded
imported back into the ioLogik E2260 if it has been reset to factory defaults.
Load Factory Default
This function will reset all of the ioLogik E2260’s settings to the factory default values. All
previous settings including the console password will be lost.
Save/Restart
If you change the configuration, do not forget to reboot the system.