User`s manual

ioLogik E2260 User’s Manual Using the Web Console
4-7
Refer to the following table for additional configuration examples.
Allowed Hosts IP address/Netmask
Any host Disable
192.168.1.120 192.168.1.120 / 255.255.255.255
192.168.1.1 to 192.168.1.254 192.168.1.0 / 255.255.255.0
192.168.0.1 to 192.168.255.254 192.168.0.0 / 255.255.0.0
192.168.1.1 to 192.168.1.126 192.168.1.0 / 255.255.255.128
192.168.1.129 to 192.168.1.254 192.168.1.128 / 255.255.255.128
SNMP Agent
On the SNMP Agent page, you may enable SNMP and set the read and write settings. The ioLogik
Ethernet I/O device supports SNMP v1, v2c, and V3 (Simple Network Management Protocol) to
allow monitoring of network and I/O devices with SNMP Network Management software. It is
useful in building automation and telecom applications. Use these fields to enable SNMP and set
the read and write community strings for SNMP v1 and v2c, or use authentication for SNMP v3.
Network Connection
On the Network Connection page, you may view the TCP connections from other hosts. This may
assist you in the management of your devices.