User`s manual

ioLogik E2260 User’s Manual Using the Web Console
4-6
You may use the Power On Setting field to specify the channel's status when the ioLogik E2260 is
powered on, and the Safe Status Setting field to specify the channel’s status if the network is
disconnected. Note that Safe Status is controlled by the Host Connection Watchdog, which is
disabled by default. If the Host Connection Watchdog is disabled, the channels' Safe Status
settings will have no effect.
System Management
Accessible IP Settings
On the Accessible IP Settings page, you may control network access to the ioLogik E2260. When
the accessible IP list is enabled, a host’s IP address must be listed in order to have access to the
ioLogik E2260.
You may add a specific address or range of addresses by using a combination of IP address and
netmask, as follows:
y To allow access to a specific IP address
Enter the IP address in the corresponding field; enter 255.255.255.255 for the netmask.
y To allow access to hosts on a specific subnet
For both the IP address and netmask, use 0 for the last digit (e.g., 192.168.1.0 and
255.255.255.0).
y To allow unrestricted access
Deselect the Enable the accessible IP list option.