User`s manual

ioLogik E2260 User’s Manual Using the Web Console
4-4
RS-485 Settings
On the RS-485 Settings page, you may view the serial communication parameters, but no
configuration changes are allowed. The baudrate may only be configured by the physical dial on
the back of the ioLogik E2260. This is a reserved function.
I/O Settings
RTD Channels
On the RTD Channels page, you may view the status of channels RTD-00 through RTD-11, which
includes both physical and virtual channels.
You may click on each channel to enable or disable it, or to configure the RTD input mode. When
a channel has been disabled, the sample rate of the remaining channels will be increased
automatically.