User`s manual

ioLogik E2260 User’s Manual Using the Web Console
4-3
Network Settings
General Settings
On the General Settings page, you may assign a server name and location to assist you in
differentiating between different I/O servers. You may also enable the Host Communication
Watchdog and define the timeout value.
When enabled, the Host Connection Watchdog activates Safe Status settings for DO channels
when the ioLogik E2260 loses its network connection for the specified amount of time. By default,
the Watchdog is disabled. You may use ioAdmin to configure each DO channel's Safe Status
setting.
To enable the Watchdog, make sure that Enable connection watchdog is checked, set the timeout
value, and restart the server.
Ethernet Configuration
On the Ethernet Configuration page, you may set up a static or dynamic IP address for the ioLogik
E2260, as well as the subnet mask and gateway address.