User`s manual
ioLogik E2260 User’s Manual Utilities
3-23
ATTENTION
You can also run TFTP client software, open the configuration file, and enter the remote server’s
IP. Note that both ASCII and Octet mode are supported. When the download process is complete,
the I/O server will reboot.
WinTFTP Client Pro is a trademark of WinTFTP. All rights reserved.
Using ioEventLog
Installing ioEventLog
ioEventLog is a Windows utility provided for the monitoring of the ioLogik E2260 and attached
I/O devices. It may be used from anywhere on the network to monitor the ioLogik E2260.
1. Installation from CD: Insert the Document and Software CD into the host computer. Run
SETUP.EXE, which is located in the root directory. The installation program will guide you
through the installation process and install the ioEventLog utility.
2. Open ioEventLog: After installation is finished, run ioEventLog from Start Æ Program Files
Æ Moxa Æ IO Server Æ Utility ÆioEventLog.
Basic Functions
ioEventLog is installed along with ioAdmin form the Document and Software CD. It is designed
to help you keep a record of ioLogik status events over the network. The log is stored on the
Windows PC. You will need to set up your ioLogik server to send status events to the PC’s IP
address. The following events are monitored:
y cold start
y warm start
For each event, the following information is provided. The log can be sorted by any of these fields:
y Event type
y Event date and time
y ioLogik server source name
y Source IP
y Destination IP
y Host date and time