User`s manual

ioLogik E2260 User’s Manual Utilities
3-21
Disconnect
Select this command to have ioAdmin drop the network connection with the selected ioLogik
server.
Delete I/O Server
Select this command to have ioAdmin remove the selected server.
Add Serial I/O Server
Select this command to manually add a serial I/O server by using its Unit ID.
Restart System
Select this command to restart the selected ioLogik server. You will need to log in as an
administrator to use this function.
Reset to Default
Select this command to reset all settings for the selected ioLogik server, including console
password and IP address, to factory default values. You will need to log in as an administrator to
use this function.
Export System Config
Select this command to export the configuration of the selected ioLogik server to a text file. You
will need to log in as an administrator to use this function. It is strongly recommended you use this
method to back up your configuration after you have finished configuring the ioLogik for your
application.
The following is an example of the exported configuration file: