User`s manual

ioLogik E2260 User’s Manual Utilities
3-15
If you will be using ioEventLog to receive server status reports, such as for warm or cold starts,
you need to specify the IP address and port number for the PC that will be running ioEventLog in
the “System Log” field. The default port number is 4040. For additional information, please refer
to the ioEventLog section later in this chapter.
Network Tab
The Network tab is where you configure IP settings, Modbus/TCP Alive Check Timeout settings,
DNS settings, Serial settings, and Web Access settings for the ioLogik E2260.