User`s manual

ioLogik E2260 User’s Manual Utilities
3-9
Server Settings Tab (General)
The Server Settings tab is where you log in as an administrator. This is required in order to gain
access to the ioLogik E2260 configuration options. If no administrator password has been set up,
simply click Login and leave the Password for entry field blank. Please refer to the ioAdmin
Administrator Functions section later on in this chapter for more detail.
Message Monitor Tab
The Message Monitor tab will display any TCP/UDP I/O messages received from the ioLogik
E2260. When you install the ioLogik E2260 for the first time, the Click&Go ruleset will not have
been defined yet, so no messages will be displayed. Please refer to Chapter 5 for information on
using Click&Go. Once a ruleset has been ddefined and activated, any TCP/UDP messages sent
from the ioLogik E2260 will be displayed in the Message Monitor tab.
Messages can be displayed in ASCII or in HEX. To display messages in HEX, make sure that
“Toggle HEX” is checked.