User`s manual
ioLogik E2260 User’s Manual Initial Setup
2-3
Adding More I/O Channels
A cost effective way to add more I/O channels to your ioLogik E2000 I/O server is to attach the
appropriate ioLogik R2000 I/O server. The two servers can be snapped together using the RS-485
system bus connector, as shown in the following figure. Digital I/O channels can be added using
the ioLogik R2110, and analog I/O channels can be added using the ioLogik E2140. For additional
details, please refer to the ioLogik R2110 or R2140 user’s manual.
Software Installation
ioAdmin is a Windows utility provided for the configuration and management of the ioLogik
E2260 and attached I/O devices. It may be used from anywhere on the network to monitor and
configure the ioLogik E2260. You may also configure some of the settings through the web
console or optional LCM.
1. Installation from CD: Insert the Document and Software CD into the host computer. In the root
directory of the CD, locate and run SETUP.EXE. The installation program will guide you
through the installation process and install the ioAdmin utility. You can also install the MXIO
DLL library or ioEventLog separately.
2. Open ioAdmin: After installation is finished, run ioAdmin from Start
Æ Program Files Æ
Moxa
Æ IO Server Æ Utility Æ ioAdmin.
3. Search the network for the server: On the menu bar, select System
ÆAuto Scan Active
Ethernet I/O Server. In the dialog window that appears, click Start Search to begin searching
for the ioLogik E2260.