Datasheet

4
www.moxa.com
[e-mail]
Remote I/O
ioLogik E2260 Specifications
ioLogik E2262 Specifications
Common Specifications
Inputs and Outputs
RTD Inputs: 6 channels
Digital Outputs: 4 channels
Isolation: 3k VDC or 2k Vrms
RTD Inputs
Input Type: PT50, PT100, PT200, PT500, PT1000; JPT100, JPT200,
JPT500, JPT1000; NI100, NI120, NI200, NI500, NI1000; Resistance of
310, 620, 1250, and 2200 ohms
Input connection: 2 or 3 wire
Sampling Rate: 12 samples/sec (all channels)
Resolution: 0.1°C or 0.1 ohm
Accuracy:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C
Input Impedance: 625k ohms
Inputs and Outputs
Thermocouple Inputs: 8 channels
Digital Outputs: 4 channels
Thermocouple Input
Sensor Type: J (0 to 750°C), K (-200 to 1250°C), T (-200 to 350°C), E
(-200 to 900°C), R (-50 to 1600°C), S (-50 to 1760°C), B (600 to
1700°C), N (-200 to 1300°C)
Millivolt Type:
• Mode: ±78.126 mV, ±39.062 mV, ±19.532 mV
• Fault and over-voltage protection: -35 to +35 VDC (power off);
-25 to +30 VDC (power on)
Sampling Rate: 12 samples/sec (all channels)
Resolution: 16 bits
Accuracy:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C
Input Impedance: 1 M ohms
Digital Output
Type: Sink
I/O Mode: DO or Pulse Output
Pulse Output Frequency: 100 Hz
Over-voltage Protection: 45 VDC
Over-current Protection: 2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown: 175°C
Current Rating: 200 mA per channel
Power Requirements
Power Consumption: 95 mA @ 24 VDC
MTBF (mean time between failures)
Time: 327,282 hrs
Database: Telcordia (Bellcore)
Digital Output
Type: Sink
I/O Mode: DO or Pulse Output
Pulse Output Frequency: 100 Hz
Over-voltage Protection: 45 VDC
Over-current Protection: 2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown: 175°C
Current Rating: 200 mA per channel
Isolation: 3k VDC or 2k Vrms
Power Requirements
Power Consumption: 160 mA @ 24 VDC
MTBF (mean time between failures)
Time: 341,063 hrs
Database: Telcordia (Bellcore)
Power Requirements
Power Consumption: 178 mA @ 24 VDC
MTBF (mean time between failures)
Time: 204,391 hrs
Database: Telcordia (Bellcore)
LAN
Ethernet: 1 10/100 Mbps RJ45 port
Protection: 1.5 kV magnetic isolation
Protocols: Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP,
CGI, SNTP, SMTP
Serial Communication
Interface: RS-485-2w: Data+, Data-, GND (3-contact terminal block)
Serial Line Protection: 15 kV ESD for all signals
Serial Communication Parameters
Parity: None
Data Bits: 8
Stop Bits: 1
Flow Control: None
Baudrate: 1200 to 115200 bps
Protocol: Modbus/RTU
Power Requirements
Power Input: 24 VDC nominal, 12 to 36 VDC
Physical Characteristics
Wiring: I/O cable max. 14 AWG
Dimensions: 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight: under 250 g
Mounting: DIN rail or wall
Environmental Limits
Operating Temperature:
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m
Note: Please contact Moxa if you require products guaranteed to function
properly at higher altitudes.