Datasheet

ManualsBrandsMoxa Manualscomputer componentsIOLOGIK E2212

www.moxa.com

info@moxa.com

Remote I/O

PC-Free Alarm and Control Intelligence

SNMP Protocol for Ethernet Device Management

The ioLogik E2200 supports simple and powerful Click&Go™

technology to configure event-driven reports and alarms delivered over

email, TCP/UDP, or SNMP traps, giving you a powerful effective, tool

for delivering time-stamped status updates in real time.

With built-in Click&Go™ intelligence, the ioLogik E2200 can be

configured for simple outputs paired up with simple input triggers

without the need for a PC controller. This allows the ioLogik E2200 to

be configured to automatically report I/O events according to user-

specified conditions.

In addition to Modbus/TCP, the ioLogik E2200 supports both SNMP

and CGI scripting, giving IT engineers familiar tools for controlling and

monitoring I/O systems. By using SNMP, IT engineers can configure

the ioLogik E2200 to deliver alarms (traps) for specific I/O events, or

use it to read or write directly to the I/O registers. For the strongest

security, the ioLogik E2200 features SNMP v3, with authentication

and encryption. With Moxa’s SNMP-capable ioLogik E2200, even IT

professionals can easily integrate industrial sensors and servos over

an Ethernet backbone, and with its strong network management tools

the ioLogik E2200 is ideal for a wide variety of industrial applications,

whether in environmental monitoring, telecommunications, power

production and delivery, or transportation.

ioLogik E2200 Series

Moxa’s ioLogik E2200 Ethernet Remote I/O features the Click&Go

programming interface. The ioLogik E2200 is a PC-based data

acquisition and control device that uses proactive, event-based

reporting to control I/O devices. Unlike traditional PLCs, which are

passive and must poll for data, Moxa’s ioLogik E2200 series will,

when paired with our MX-AOPC UA Server, communicate with SCADA

systems using active messaging that is pushed to the server only

when state changes or configured events occur. Additionally, the

ioLogik E2200 features SNMP for communications and control using

an NMS (Network Management System), allowing IT professionals to

configure the device to push I/O status reports according to configured

specifications. This report-by-exception approach, which is new to PC-

based monitoring, requires far less bandwidth than traditional polling

methods.

Smart Ethernet remote I/O with Click&GO Logic

Introduction

› Active communication with patented MX-AOPC UA Server and

Active OPC server

› Smart alarm management with email, SNMP traps, TCP, UDP

› Save time and wiring costs with peer-to-peer communication

› Front-end intelligence with patented Click&Go control logic, up to

24 rules

› Simplify I/O management with MXIO library for Windows or Linux

› Web browser conﬁgurations over HTTP

› Supports SNMP v1/2c/3

› Wide operating temperature range of -40 to 75°C (-40 to 167°F)

Summary of content (5 pages)

PAGE 1
Remote I/O ioLogik E2200 Series Smart Ethernet remote I/O with Click&GO Logic ››Active communication with patented MX-AOPC UA Server and Active OPC server ››Smart alarm management with email, SNMP traps, TCP, UDP ››Save time and wiring costs with peer-to-peer communication ››Front-end intelligence with patented Click&Go control logic, up to 24 rules ››Simplify I/O management with MXIO library for Windows or Linux ››Web browser configurations over HTTP ››Supports SNMP v1/2c/3 ››Wide operating temperature r
PAGE 2
Remote I/O Push Technology for Events and Alarms The ioLogik E2200 series is designed for use with the Moxa’s MX-AOPC UA server. When used with MX-AOPC UA Server, the E2200 is upgraded to use active push communications when communicating state changes and/or events to the SCADA. Unlike a polling system, when using a push architecture for communications with the SCADA messages will only be delivered when state changes or configured events occur.
PAGE 3
Remote I/O ioLogik E2214 Specifications Inputs and Outputs Digital Inputs: 6 channels Relay Outputs: 6 channels Isolation: 3k VDC or 2k Vrms Digital Input Sensor Type: Wet Contact (NPN or PNP) and Dry Contact I/O Mode: DI or Event Counter Dry Contact: • On: short to GND • Off: open Wet Contact (DI to GND): • On: 0 to 3 VDC • Off: 10 to 30 VDC Common Type: 3 points per COM Counter Frequency: 900 Hz Digital Filtering Time Interval: Software Configurable Relay Output Type: Form A (N.O.
PAGE 4
Remote I/O Power Requirements Power Consumption: 178 mA @ 24 VDC MTBF (mean time between failures) Time: 204,391 hrs Database: Telcordia (Bellcore) ioLogik E2260 Specifications Inputs and Outputs RTD Inputs: 6 channels Digital Outputs: 4 channels Isolation: 3k VDC or 2k Vrms RTD Inputs Input Type: PT50, PT100, PT200, PT500, PT1000; JPT100, JPT200, JPT500, JPT1000; NI100, NI120, NI200, NI500, NI1000; Resistance of 310, 620, 1250, and 2200 ohms Input connection: 2 or 3 wire Sampling Rate: 12 samples/se
PAGE 5
Remote I/O Standards and Certifications Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Green Product: RoHS, CRoHS, WEEE Safety: UL 508 EMI: EN 61000-3-2; EN 61000-3-3; EN 61000-6-4; FCC Part 15, Subpart B, Class A EMS: EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61000-6-2 Shock: IEC 60068-2-27 Note: Please check Moxa’s website for the most up-to-date certification status.