Datasheet

www.moxa.com
4
Input Range ioLogik E2240 Series: ±150 mV, ±500 mV, ±5 V, ±10 V, 0 to 20 mA, 4 to 20 mA
ioLogik E2242 Series: ±150 mV, 0 to 150 mV, ±500 mV, 0 to 500 mV, ±5 V, 0 to 5 V, ±10 V,
0 to 10 V, 0 to 20 mA, 4 to 20 mA
Resolution 16 bits
Sampling Rate ioLogik E2240 Series:
All Channels: 10 samples/sec for voltage; 6 samples/sec for current
Per Channel: 1.25 samples/sec for voltage; 0.75 samples/sec for current
Single channel: 1.25 samples/sec for voltage; 0.75 samples/sec for current
ioLogik E2242 Series:
All channels: 32 samples/sec
Per channel: 8 samples/sec
Single channel: 100 samples/sec
Built-in Resistor for Current Input 120 ohms
Over-Voltage Protection -25 to +30 VDC (power on)
-35 to +35 VDC (power off)
Analog Outputs
Accuracy ioLogik E2240:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik E2240-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
Output Range 0 to 10 VDC
4 to 20 mA
Resolution 12-bit
Load (Current Mode) Internal power: 250 ohms (max.)
RTDs
Accuracy ioLogik E2260:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik E2260-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
Connector Screw-fastened Euroblock terminal
Input Connection 2- or 3-wire
Input Impedance 625 kilo-ohms (min.)
Sensor Type JPT100, JPT200, JPT500 (-200 to 640°C)
JPT1000 (-200 to 350°C)
NI100, NI200, NI500 (-60 to 250°C)
NI1000 (-60 to 150°C)
NI120 (-80 to 260°C)
PT1000 (-200 to 350°C)
PT50, PT100, PT200, PT500 (-200 to 850°C)
Resistance of 310, 620, 1250, and 2200 ohms
Resolution 0.1°C or 0.1 ohms
Sampling Rate All channels: 12 samples/sec
Per channel: 2 samples/sec