User`s manual

ioLogik E1200 Series Introduction
1-2
Product Model Information
Model Description
ioLogik E1210 Remote Ethernet I/O with 2-port Ethernet switch and 16 DIs
ioLogik E1211 Remote Ethernet I/O with 2-port Ethernet switch and 16 DOs
ioLogik E1212 Remote Ethernet I/O with 2-port Ethernet switch, 8 DIs, and 8 DIOs
ioLogik E1214 Remote Ethernet I/O with 2-port Ethernet switch, 6 DIs, and 6 relays
ioLogik E1240 Remote Ethernet I/O with 2-port Ethernet switch and 8 AIs
ioLogik E1241 Remote Ethernet I/O with 2-port Ethernet switch and 4 AOs
ioLogik E1242 Remote Ethernet I/O with 2-port Ethernet switch and 4 AIs, 4DIs, and 4DIOs
ioLogik E1260 Remote Ethernet I/O with 2-port Ethernet switch and 6 RTDs
ioLogik E1262 Remote Ethernet I/O with 2-port Ethernet switch and 8 TCs
Product Features
• Built-in 2-port Ethernet switch for daisy-chain topologies.
• Free support of Moxa’s push-based Active OPC Server Lite.
 Seamlessly connect to any SCADA system
 Save 80% on network bandwidth
 I/O response that’s seven times faster
• User-defined Modbus/TCP addressing
• MXIO programming library for Windows and WinCE VB/VC.NET and Linux C APIs
• Web configuration with Import/Export function
• Peer-to-peer transmission of I/O signals over Ethernet without controller
Inside the Box
The ioLogik E1200 is shipped with the following items:
Standard Accessories
• ioLogik E1200 Remote Ethernet I/O Server.
• Document and Software CD.
• Quick Installation Guide.
NOTE: Notify your sales representative if any of the above items are missing or damaged.
Product Specifications
ioLogik E1210
Digital Input
Sensor Type: NPN, PNP, and Dry contact
I/O Mode: DI or Event Counter
Dry Contact:
• Logic 0: short to GND
• Logic 1: open
Wet Contact:
• Logic 0: 0 to 3 VDC
• Logic 1: 10 to 30 VDC (DI COM to DI)
Isolation: 3K VDC or 2K Vrms
Counter/Frequency: 250 Hz, power off storage