User`s manual

ioLogik E1200 Series Using the Web Console
3-15
Client settings:
Note: refer to the table below for maximum number of rules supported at different signal frequencies.
1 Hz 2 Hz 4 Hz 10 Hz 20 Hz
1 rule
    
10 rules
  
20 rules
  
30 rules
 
40 rules
 
50 rules

DO Safe Mode Settings
When a peer-to-peer rule on a local DO channel is not valid, the local DO channel will enter safe mode. You can
set the DO to be ON or OFF in safe mode.
Change Password
For all changes to the ioLogik E1200’s password protection settings, you will first need to enter the old
password. Leave this blank if you are setting up password protection for the first time. To set up a new
password or change the existing password, enter your desired password under both New password and
Confirm password. To remove password protection, leave the New password and Confirm password
fields blank.