User`s manual

ioLogik E1200 Series Introduction
1-7
Physical Dimensions
132
124
84
27
27.8
Unit=mm
Hardware Reference
Panel Guide
NOTE The reset button restarts the server and resets all settings to factory defaults. Use a pointed object such as a
straightened paper clip to hold in the reset button for 5 sec. The factory defaults will be loaded once the Ready
LED turns green again. You may then release the reset button.
LED Indicators
LED State Description
Amber System power is ON Power
OFF System power is OFF
Green System is ready
Flashing Flashes every 1 sec when the Locate function is triggered
Flashing Flashes every 0.5 sec when the firmware is being upgraded
Flashing Cycle on/off period of 0.5 sec. represents “Safe Mode”
Ready
OFF System is not ready.