User`s manual

ioLogik E1200 Series Introduction
1-6
ioLogik E1262
Thermocouple Input
Sensor Type: J, K, T, E, R, S, B, N
Mili Volt Type: ±78.126 mV, ±39.062 mV, ±19.532 mV
Fault and Overvoltage protection: ±35 VDC (power off); +30 VDC, -25 VDC (power on)
Sampling Rate: 12 samples/sec (all channels)
Resolution: 16 bits
Accuracy:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
Input Impedance: 10M ohms
MTBF (meantime between failures)
Time: 631,418 hrs
Database: Telcordia (Bellcore)
Common Specifications
LAN
Ethernet: 2 x 10/100 Mbps switch ports, RJ45
Protection: 1.5 KV magnetic isolation
Protocols: Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP
Power Requirements
Power Input: 24 VDC nominal, 12 to 36 VDC
Power Consumption: 130 mA typical @ 24 VDC
Physical Characteristics
Wiring: I/O cable max. 14 AWG
Dimensions: 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight: under 200 g
Environmental Limits
Operating Temperature: Standard Models: -10 to 60°C (14 to 140°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
Safety: UL 508
EMI: FCC Part 15 Subpart B Class A
EMS: IEC 61000-4, IEC 61000-6
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Note: Please check Moxa's website for the most up-to-date certification status.
Warranty
Warranty Period: 5 years (excluding ioLogik E1214*)
Details: See www.moxa.com/warranty
*Because of the limited lifetime of power relay, products that use this component are covered by a
2-year warranty.