Datasheet

www.moxa.com

Note: 24 V of external power required when loading exceeds 1000 ohms

Output Range 0 to 10 VDC

4 to 20 mA

Resolution 12-bit

RTDs

Accuracy ioLogik E1260:

±0.1% FSR @ 25°C

±0.3% FSR @ -10 to 60°C

ioLogik E1260-T:

±0.1% FSR @ 25°C

±0.3% FSR @ -40 to 75°C

Connector Screw-fastened Euroblock terminal

Input Connection 2- or 3-wire

Input Impedance 625 kilo-ohms (min.)

Sensor Type PT1000 (-200 to 350°C)

PT50, PT100, PT200, PT500 (-200 to 850°C)

Resistance Type 310, 620, 1250, and 2200 ohms

Resolution 0.1°C or 0.1 ohms

Sampling Rate ioLogik E1260: 12 samples/sec per module (shared between up to 6 channels)

Thermocouples

Millivolt Accuracy ioLogik E1262:

±0.1% FSR @ 25°C

±0.3% FSR @ -10 to 60°C

ioLogik E1262-T:

±0.1% FSR @ 25°C

±0.3% FSR @ -40 to 75°C

Connector Screw-fastened Euroblock terminal

TC Accuracy Types J, T, E, S, B: ±5°C

Types K, R, N: ±8°C

CJC Accuracy ±0.5°C @ 25°C

±1.5°C @ -40 to 75°C

Input Impedance 10 mega-ohms (min.)

Millivolt Type ±19.532 mV

±39.062 mV

±78.126 mV

Fault and over-voltage protection: -35 to +35 VDC (power off); -25 to +30 VDC (power

on)

Resolution 16 bits

Sampling Rate ioLogik E1262: 12 samples/sec per module (shared between up to 8 channels)

Sensor Type J, K, T, E, R, S, B, N

4. If N channels are enabled, the sampling rate for each enabled channel = 12/N samples/sec.