Datasheet

www.moxa.com
3
Digital Outputs
Connector Screw-fastened Euroblock terminal
I/O Mode DO or pulse output
I/O Type Sink
Current Rating 500 mA per channel
Pulse Output Frequency 5 kHz (max.)
DIO Output Leakage Current < 1 mA @ 30 VDC
Over-Current Protection 1.5 A per channel @ 25°C
Over-Temperature Shutdown 175°C (typical), 150°C (min.)
Over-Voltage Protection 45 VDC (typical)
Analog Inputs
Connector Screw-fastened Euroblock terminal
I/O Mode Voltage/Current
I/O Type Differential
Input Range ±10 VDC
0 to 10 VDC
0 to 20 mA
4 to 20 mA
4 to 20 mA (with burn-out detection)
Resolution 16 bits
Sampling Rate All channels: 400 samples/sec
Per channel: 100 samples/sec
Accuracy ioLogik 2542 Series (except -T models):
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik 2542-T
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
ioLogik 2542 HSPA-T/WL1-EU-T/WL1-JP-T/WL1-US-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -30 to 70°C
±0.5% FSR @ -30 to 70°C
Built-in Resistor for Current Input 120 ohms
Input Impedance 1 mega-ohms (min.)
Over-Voltage Protection -25 to +30 VDC (power on)
-35 to +35 VDC (power off)
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector) 4, 1 MAC address (Ethernet bypass)
Magnetic Isolation Protection 1.5 kV (built-in)