Datasheet

Smart I/O
3
www.moxa.com
ioLogik 2542 Specifications
Inputs and Outputs
Configurable DIOs (by software): 12 channels
Analog Inputs: 4 channels
Isolation: 3k VDC or 2k Vrms
Digital Input
Sensor Type: Wet Contact (NPN or PNP) and Dry Contact
I/O Mode: DI or Event Counter
Dry Contact:
• On: short to GND
• Off: open
Wet Contact (DI to COM):
• On: 10 to 30 VDC
• Off: 0 to 3 VDC
Common Type: 6 points per COM
Counter Frequency: 2.5 kHz
Digital Filtering Time Interval: Software configurable
Digital Output
Type: Sink
I/O Mode: DO or Pulse Output
Pulse Output Frequency: 5 kHz
Over-Voltage Protection: 45 VDC
Over-Current Protection: 1.5 A per channel @ 25°C
Over-Temperature Shutdown: 175°C (min.)
Current Rating: 500 mA per channel @ 25°C
DIO Output Leakage Current: < 1 mA @ 30 VDC
Analog Input
Type: Differential input
Resolution: 16 bits
I/O Mode: Voltage / Current (software selectable)
Input Range: ±10 V, 0 to 10 V, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA
(burnout detection)
Accuracy:
• ±0.1% FSR @ 25°C
• ±0.3% FSR @ -10 and 60°C
• ±0.5% FSR @ -30 and 70°C
Sampling Rate:
• All channels: 400 samples/sec
• Per channel: 100 samples/sec
Input Impedance: 1M ohms (min.)
Built-in Resistor for Current Input: 120 ohms
Power Requirements
Input Voltage: 9 to 48 VDC
Input Current:
• HSPA Model: 442 mA @ 24 VDC
• GPRS Model: 494 mA @ 24 VDC
• WL1 Model: 406 mA @ 24 VDC
MTBF (mean time between failures)
Time:
• HSPA model: 378,154 hrs
• GPRS model: 403,087 hrs
• WL1 model: 331,222 hrs
Standard: Telcordia SR332
Common Specifications
Cellular
Standards: GSM/GPRS/EDGE/UMTS/HSPA+
HSPA Model Band Options:
• UMTS/HSPA+: ve-band 800/850/900/1900/2100 MHz
• GSM/GPRS/EDGE: quad-band 850/900/1800/1900 MHz
GPRS Model Band Options: GSM/GPRS/EDGE: quad-band
850/900/1800/1900 MHz
SIM Control Voltage: 3/1.8 V
SIM Format: Full size
WLAN
Standards:
• IEEE 802.11a/b/g for wireless LAN
• IEEE 802.11i for wireless security
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 11
Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @
18/12 Mbps, BPSK @ 9/6 Mbps
Inputs and Outputs
Digital Inputs: 8 channels
Configurable DIOs (by software): 8 channels
Isolation: 3k VDC or 2k Vrms
Digital Input
Sensor Type: Wet Contact (NPN or PNP) and Dry Contact
I/O Mode: DI or Event Counter
Dry Contact:
• On: short to GND
• Off: open
Wet Contact (DI to COM):
• On: 10 to 30 VDC
• Off: 0 to 3 VDC
Common Type: 8 points per COM
Counter Frequency: 2.5 kHz
Digital Filtering Time Interval: Software configurable
Digital Output
Type: Sink
I/O Mode: DO or Pulse Output
Pulse Output Frequency: 5 kHz
Over-Voltage Protection: 45 VDC
Over-Current Protection: 1.5 A per channel @ 25°C
Over-Temperature Shutdown: 175°C (min.)
Current Rating: 500 mA per channel @ 25°C
DIO Output Leakage Current: < 1 mA @ 30 VDC
Power Requirements
Input Voltage: 9 to 48 VDC
Input Current:
• HSPA Model: 390 mA @ 24 VDC
• GPRS Model: 416 mA @ 24 VDC
• WL1 Model: 328 mA @ 24 VDC
MTBF (mean time between failures)
Time:
• HSPA model: 378,154 hrs
• GPRS model: 403,452 hrs
• WL1 model: 400,469 hrs
Standard: Telcordia SR332
ioLogik 2512 Specifications