User Manual

- 5 -
Installing a 45M Module on a DIN-Rail
Step 1: Align the 45M module side by side
with the head/CPU module, making sure that
the upper and lower rails are hooked
together.
Step 2: Align the 45M module side by side with the head/CPU module
and then push the 45M module until it touches the DIN-rail. Next, apply
more force until the module clips to the DIN-rail.
NOTE
After the module is firmly attached to the DIN-rail, the module
connections to the internal bus will be established.
Removing a 45M Module from a DIN-Rail
Step 1: Use your finger to lift the
release tab on the lower part of the
module.