User Manual

ioThinx 4510 Series Appendix
A-4
02: INPUT STATUS
Parameter Description Length Type
diStatus DI - DI mode - status (0: OFF, 1: ON) 16 BOOL
diMode DI - mode (0: DI, 1: Counter) 16 BOOL
diCounterOverflowFlag DI - Counter mode - overflow flag (0: Normal, 1:
Overflow)
4 BOOL
03: HOLDING REGISTER
Parameter Description Length Type
diCounterValue DI - Counter mode - value 8 DWORD
diCounterStatusAll DI - Counter mode - status (0: Pause, 1: Run) 1 WORD
diCounterOverflowFlagClearAll DI - Counter mode - clear overflow flag (1: Clear) 1 WORD
04: INPUT REGISTER
Parameter Description Length Type
diStatusAll DI - DI mode - status (0: OFF, 1: ON) 1 WORD
diCounterOverflowFlagAll DI - Counter mode - overflow flag (0: Normal, 1:
Overflow)
1 WORD
diModeAll DI - mode (0: DI, 1: Counter) 1 WORD
45MR-2404 (-T), 4 Relays Registers
01: COIL STATUS
Parameter
Description
Length
Type
relayStatus Relay - Relay mode - status (0: OFF, 1: ON) 4 BOOL
relayCurrentCountReset Relay - reset current count (1: Reset) 4 BOOL
03: HOLDING REGISTER
Parameter Description Length Type
relayStatusAll Relay - Relay mode - status (0: OFF, 1: ON) 1 WORD
04: INPUT REGISTER
Parameter Description Length Type
relayTotalCount Relay - total count 8 DWORD
relayCurrentCount Relay - current count 8 DWORD
45MR-2600 (-T), 16 DOs Registers
01: COIL STATUS
Parameter Description Length Type
doStatus DO - status (0: OFF, 1: ON) 16 BOOL
doPulseStatus DO - Pulse mode - status (0: Stop, 1: Start) 4 BOOL
02: INPUT STATUS
Parameter Description Length Type
doMode DO - mode (0: DO, 1: Pulse) 16 BOOL
03: HOLDING REGISTER
Parameter
Description
Length
Type
doStatusAll DO - status (0: OFF, 1: ON) 1 WORD
doPulseCount DO - Pulse mode - count 8 DWORD
doPulseOnWidth DO - Pulse mode - ON width (unit: 500 us) 4 WORD
doPulseOffWidth DO - Pulse mode - OFF width (unit: 500 us) 4 WORD
doPulseStatusAll DO - Pulse mode - status (0: Stop, 1: Start) 1 WORD