User Manual

ioThinx 4510 Series Quick Start Guide
5-18
NOTE
Performing a f
irmware update will delete the configurations in the device. Backup the configurations before
performing the
firmware update.
Restarting the Unit
This device will restart automatically after the firmware and configurations have been updated. The user can
also restart the device manually.
Step 1: Click Save & Restart on the right upper corner of the page.
Step 2: The device will confirm that you want to perform a restart. Click Restart Device in order to restart the
device.
INFORMATION
This device does not have a battery. Therefore, if the device is powered off, the system date and time
will have to be set again. If the NTP server is not available, set the
date and time
of the device after
rebooting
.