User Manual

ioThinx 4510 Series Quick Start Guide
5-3
If you see the module settings page as opposed to the dashboard, click Edit to enter the edit mode and start
editing the module settings.
In edit mode, if any detected module and configured module do not match, the configured module will be
highlighted as shown below.
Click Auto Matching to match the conflicted modules.
If not, you can use the “Auto Match” function or swap the module to change the module sequence.
If you want to re-arrange the 45MR modules automatically, you can click “Auto Match”.
If you want to change configurations, you can use the swap function. To swap the module sequence, move the
point to the module, click the left button on the mouse and hold it. After the module color changes to green, you
can move it to change the position of the module.