User Manual

ioThinx 4510 Series Quick Start Guide
5-2
Configuring the Unit
This section explains how to configure this device through the Web Console from the beginning. If you require
additional information, please refer to Preparing Software Tools before reading this section.
Login to the Unit
Follow the steps to log in to the unit.
Step 1: Open your web browser and type the default IP address of the device, 192.168.127.254.
Step 2: On the login page, type the default username/password (admin/moxa) to log in to the Web Console.
Configuring Module Settings
After you have logged in, you can see the dashboard or the module settings page. If the detected module
matches the configured module, you will see the Dashboard as below. Then click Module in the Menu panel
to go to the module settings page.