User Manual

ioThinx 4510 Series Software Tools
4-29
Start Address Textbox: Change the value of the Start Address in the textbox (0 to 65535 or leave it blank).
When there is no value in the textbox, it will be displayed in light yellow. When it conflicts with another register,
it will be displayed in red. Revise the value to prevent address conflict. You can use the Sort function to see
where there is a conflict of addresses.
Sort: The default-sorted column is the Slot from the lowest to highest slot number. Click the green arrow to
change the sorting method. Click the gray arrows on the other columns to sort that specific column.
INFORMATION
Enable/disable this
service through Security  Service Settings.
INFORMATION
In the event that a conflict address value is entered, whenever you click on a different point type tab,
the previous configurations will be restored to avoid the conflict.
INFORMATION
Refer to
Modbus/TCP Slave Rules for the available Modbus register.
SNMP
SNMP Settings
Version: Select one of the SNMP version options (option: v1 and v2c, v3 only, or v1 and v2c and v3), through
which the SNMP Manager can access the SNMP agent of the device.
Contact: Type the contact of the SNMP server (max length = 30).
Location: Type the physical location of the SNMP server (max length = 30).