User Manual

ioThinx 4510 Series Software Tools
4-27
IR Information: The IR status window will pop-up after you click one of the IR blocks. The name is used for
representing this internal register (max. length = 16, “.” is not allowed).
Protocol
This section introduces the protocol settings functions.
Modbus TCP Slave
The Modbus TCP Slave section shows the definition of the device’s Modbus registers. It allows you to define
your own data point type or address of the Modbus registers. The point type and address of a register can be
default, existing configuration, or user-defined.
Load Default: Click this button to load default settings of all Modbus registers.