User Manual

ioThinx 4510 Series Software Tools
4-10
NOTE
Do not disconnect the power or network cable during the update
process.
NOTE
This
device supports firmware automatic recovery function. If the firmware in the device is corrupted, the
system will load the backup firmware automatically to overwrite the corrupted one. When the system is in
recovery mode, the RDY
LED will slowly blink red. DO NOT DISCONNECT the power cable when the
recovery
process
is underway. After the recovery process is complete, you can update the firmware again.
INFORMATION
The update process cannot be canceled after "Update" is clicked.
INFORMATION
Back
up the configuration file before updating the device firmware.
Security
The Security section allows you to manage the security policy of the device.
NOTE
Do not
expose the device to the public Internet without any security protection. To increase the
security of the
device, we suggest configuring security settings prior to other settings.
Service Settings
Enable/disable services to prevent unwanted access. The Default configuration enables Web Server.
NOTE
If all services are disabled, this device will no longer be accessible, and you will need to load the factory default
configuration
s to access the device.