User Manual

ioThinx 4510 Series Software Tools
4-7
System
This section introduces the functions of the device’s system.
Device Settings
Device Name: Set the name of this device (max length = 16, '.' is not allowed).
Language: Select the language of the web console.
Time Settings
System Date & Time: Select the date for the device. Click Set Time to set the time of the device.
Enable NTP Server: Click the checkbox to enable date and time synchronization with the NTP sever.
NTP Server: Set the URL or IP address of the NTP server.
Sync Interval: Set the synchronization interval with the NTP sever (unit: min(s), 1 to 43200, default = 1440).
INFORMATION
This device does not have a battery. Therefore, if the device is powered off, the system date and time
will have to be set again.
If the NTP server is not available, set the date and time of the device
after
rebooting.