User Manual

- 4 -
Mounting Dimensions
DIN-Rail Mounting
The aluminum DIN-rail attachment
plate should be fixed to the back
panel of the
IMC-21GA when you
take it out of the box. If you need to
reattach the DIN
-rail attachment
plate to the
IMC-21GA, make sure
the stiff metal spring is situated
towards the top.
Wiring Requirements
ATTENTION
Safety First!
Be sure to disconnect the power cord before installing and/or
wiring your IMC
-21GA.
Calculate the maximum possible current
allowed in each power
wire and
common wire. Observe all electric
al codes dictating the
maximum current allow
ed for each wire size.
If the current goes above the maximum rating, the wir
es could
overheat, causing serious damage to your equipment.