Datasheet

www.moxa.com
1
IMC-21GA Series
Industrial Gigabit Ethernet-to-fiber media converters
Features and Benefits
• Supports 1000Base-SX/LX with SC connector or SFP slot
• Link Fault Pass-Through (LFPT)
• 10K jumbo frame
• Redundant power inputs
• -40 to 75°C operating temperature range (-T models)
• Supports Energy-Efficient Ethernet (IEEE 802.3az)
Certifications
Introduction
The IMC-21GA industrial Gigabit media converters are designed to provide reliable and stable 10/100/1000BaseT(X)-to-100/1000Base-SX/LX or
selected 100/1000Base SFP module media conversion. The IMC-21GA supports IEEE 802.3az (Energy-Efficient Ethernet) and 10K jumbo frames,
allowing it to save power and enhance transmission performance. All IMC-21GA models are subjected to a 100% burn-in test, and they support a
standard operating temperature range of 0 to 60°C and an extended operating temperature range of -40 to 75°C.
Specifications
Ethernet Interface
10/100/1000BaseT(X) Ports (RJ45 connector) 1
100/1000BaseSFP Ports IMC-21GA models: 1
1000BaseSX Ports (multi-mode SC connector) IMC-21GA-SX-SC models: 1
1000BaseLX Ports (single-mode SC connector) IMC-21GA-LX-SC models: 1
Magnetic Isolation Protection 1.5 kV (built-in)
Optical Fiber
1000BaseSX 1000BaseLX
Wavelength 850 nm 1310 nm
Tx Output (dBm) -3 to -10 -3 to -9
Rx Sensitivity (dBm) -3 to -20 -3 to -21
Link Budget (dBm) 10 12
Typical Distance 500 m 10 km
Power Parameters
Input Current 285 mA @ 12 VDC
Input Voltage 12 to 48 VDC
Overload Current Protection Supported