Installation guide

- 4 -
Mounting Dimensions
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should be fixed to the back
panel of the IMC-21A when you take it out of the box. If you need to
reattach the DIN-Rail attachment plate to the IMC-21A, make sure the
stiff metal spring is situated towards the top.
Wiring Requirements
Safety First!
•
Be sure to disconnect the power cord before installing
and/or wiring your Moxa IMC.
•
Calculate the maximum possible current in each power
wire and common wire. Observe all electrical codes
dictating the maximum current allowable for each wire
size.
•
If the current goes above the maximum rating, the wiring
could overheat, causing serious damage to your
equipment.