Datasheet

www.moxa.com
2
Magnetic Isolation Protection 1.5 kV (built-in)
Optical Fiber
100BaseFX
Multi-Mode Single-Mode
Fiber Cable Type OM1
50/125 µm
G.652
800 MHz x km
Typical Distance 4 km 5 km 40 km
Wavelength
Typical (nm) 1300 1310
TX Range (nm) 1260 to 1360 1280 to 1340
RX Range (nm) 1100 to 1600 1100 to 1600
Optical Power
TX Range (dBm) -10 to -20 0 to -5
RX Range (dBm) -3 to -32 -3 to -34
Link Budget (dB) 12 29
Dispersion Penalty (dB) 3 1
Note: When connecting a single-mode fiber transceiver, we recommend using an
attenuator to prevent damage caused by excessive optical power.
Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link
budget (dB) > dispersion penalty (dB) + total link loss (dB).
Power Parameters
Input Current 265 mA @ 12 to 48 VDC
Input Voltage 12 to 48 VDC
Overload Current Protection Supported
Power Connector Terminal block
Power Consumption 265 mA @ 12 to 48 VDC
Physical Characteristics
Housing Metal
IP Rating IP30
Dimensions 30 x 125 x 79 mm (1.19 x 4.92 x 3.11 in)
Weight 170 g (0.37 lb)
Installation DIN-rail mounting
Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Standards and Certifications
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV