Datasheet

Highlights
IMC-21 Series
Features
Flexible Media Conversion Capability
Multi mode, single mode with SC or ST fiber connector available
DIP Switch to select FDX/HDX/10/100/Auto/Force
Link Fault Pass-Through (LFP)
Industrial Rugged Design
-10 to 60°C operating temperature range
Case design meets IP30 protection standard
•
•
•
•
•
Power inputs support 24 VDC or 24 VAC
DIN-Rail mounting ability
Recommended Accessories
DR series DIN-Rail 24 VDC power supplies
•
•
•
Introduction
IMC-21 industrial media converters are entry-level 10/100BaseT(X)
to 100BaseFX and 10BaseT to 10BaseFL media converters that are
specially designed for reliable and stable operation in harsh industrial
environments. IMC-21 is a cost-effective solution that runs on either
a 12 to 45 VDC power input or 18 to 30 VAC power input. IMC-21 can
operate reliably in temperatures ranging from -10 to 60°C, and the
rugged hardware design helps ensure that your Ethernet equipment
can withstand demanding industrial conditions.
Multi mode, single mode with SC or ST fiber connector
Link Fault Pass-Through (LFP)
Power inputs: 12 to 45 VDC, 18 to 30 VAC (47-63 Hz)
-10 to 60°C operating temperature range
DIP Switch to select FDX/HDX/10/100/Auto/Force
DIN-Rail mounting ability
Entry-level Industrial 10/100BaseT(X) to 100BaseFX
& 10BaseT to 10BaseFL Media Converter
IMC-21
7-6
www.moxa.com e-mail: [e-mail]
7
Industrial Media Converters
Industrial Media Converters
Technology
Standards: IEEE802.3, 802.3u, 802.3x
Interface
RJ45 ports:
• IMC-21 (10/100BaseT(X) to 100 BaseFX): 10/100BaseT(X)
• IMC-21 (10BaseT to 10BaseFL): 10BaseT
Fiber ports:
• IMC-21 (10/100BaseT(X) to 100 BaseFX): 100BaseFX (SC/ST connectors)
• IMC-21 (10BaseT to 10BaseFL): 10BaseFL (ST connector only)
LED Indicators:
• IMC-21 (10/100BaseT(X) to 100BaseFX): Power, 10/100M (TP port),
100M (Fiber port), FDX/COL (Fiber port)
• IMC-21 (10BaseT to 10BaseFL): Power, LNK/ACT (Fiber port), LNK
and ACT (TP port)
DIP Switch:
• IMC-21 (10/100BaseT(X) to 100BaseFX):
- TP port’s 10/100M, Half/Full mode, and Force/Auto mode are DIP
switch selectable
- Fiber connection’s Half/Full mode is DIP switch selectable
- Link Fault Pass-Through (LFP) is DIP switch selectable
• IMC-21 (10BaseT to 10BaseFL): TP port's MDI/MDI-X and Half/Full
mode are DIP Switch selectable
Optical Fiber
Distance: 10BaseFL: 2 km, 820 nm
100BaseFX (Multi mode): 5 km, 1300 nm
100BaseFX (Single mode): 40 km, 1310 nm
Min. TX Output: 10BaseFL: -16 dBm
100BaseFX (Multi mode): -20 dBm
100BaseFX (Single mode): -5 dBm
Specifications